Tag Archives: planter box

Rustic Wood Planter Box

In my previous post I had completed the job of cutting back the soil to four inches below the previous level leaving plenty of room for a good rock base that would allow rainfall to drain away easily. My focus now was on purchasing the supplies to construct the raised planter bed.

I had calculated that I would need a total of twenty lengths of 4″ x 4″ x 8′ pretreated lumber and twelve lengths of half inch by six foot rebar. The rebar would be cut in to three to provide two foot lengths to pin the lumber in to place. I already had a spare can of the green wood preserve so I’m going to use that up first before purchasing anymore, afterall it was my mother-in-laws budget and I was trying to get the job done at the best price possible. As far as my labor cost, that’s a no brainer, that’s traded off by looking after the children! Once complete there will be some kind of oil based stain that will cover the whole construction but the tone or color can be decided upon later.

Planter retaining wall.

With the materials in tow and a selection of power tools, chop saw, electric drill and numerous hand tools my first job was to map out the boundary of the planter box. The patch of land behind the mobile home was pie shaped to a certain degree meaning that the planter box could be slightly wedged shaped so as to reduced the effect of the angle on the remaining land between the mobile home and the planter box. I needed to know to what degree the angle would be and the person best qualified to decide that would be my mother-in-law, afterall when all is complete she would have to live with the end result.

The block wall that seperated the mobile home estate from her trailer was approximately eight feet tall with a concrete base that spread loosely below. This in effect reduced the growing room so we had to make sure that there was enough soil at ground level at the small end of the wedge so that the plant roots could travel deeper if required. Another requirement was to leave enough room between the planter box and the mobile home, so the placement of the first stake would be at this critical point. With string attached to the first stake, the second stake position and angle of the planter would be determined by the taut string once hammered into place. Continue reading Rustic Wood Planter Box